Racks
Racks that fit your lab workflows on flowbot® ONE
At Flow Robotics we offer a selection of the most common used racks for a flowbot® ONE, however if you have a specific need we can also solve this for you – just reach out to us.
Below you can see some of the rack we offer.
Dimensions:
24 holes, Ø16,5 mm
Height 79 mm
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
24 holes, Ø11,2 mm
Height 48-58 mm
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
24 holes, Ø11,2 mm
Height 58-68 mm
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
32 holes, Ø10,5 mm
Height 27mm
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
6 holes, Ø30 mm and 12 mm
Height 79
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
24 holes, Ø16,5 mm
Height 59 mm
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
24 holes, Ø13,35 mm
Height 49 mm
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
24 holes, Ø 17,75 mm
Height 59 mm
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
24 holes, Ø12,8mm
Height 49 mm
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
PCR 96 well plate
96 holes
Fill in the form below with what you need and we’ll be in touch.
Dimensions:
PCR 384 cooling well plate
384 holes
Fill in the form below with what you need and we’ll be in touch.
If you have special requests, use the form below
Want prices? Then fill in the form below
Other flowbot® ONE integrations
Want to experience flowbot® ONE?
Book a demo of the robot. You can use consumables and pipette tips of your own choice.